All brake controllers including the Hayes Engage # HA81760 you have installed will stay turned on, but the LED light for the screen is the only thing being powered and it times out after around 15 minutes so it should not be able to drain your battery. I'd first double check that this is your actual cause of a drain by having a load test run on your electrical system.
If the controller is truely applying the brakes when you're not pressing the brake pedal then something is wrong with the... view full answer...
I looked up your WJ2 Stubby Westin bumper and since it has D-rings on the front of it that would be how you'd connect a tow bar to it. You will have to measure the diameter of the holes on them though to pick out correct adapter. If the hole is 1 inch in diameter you'd want the # BX88358 or if they are 7/8 inch you'd want the part # BX88357.
You'd have to use a Blue Ox tow bar with these though like the # BX7420 as there isn't an adapter for them so they can be used on a Ready Brute tow bar. view full answer...
Thank you for all of the insight, it really helps narrow down what we need to be looking for.
I believe you are correct that the problem is on the vehicle wiring. If your 2018 Jeep Wrangler is a JK then you have something similar to the Curt # C55124 which is a simple tee solution but if you have the JL Wrangler then you have something like the Curt # C56407 which has the whole module setup.
With the JK wiring I actually believe the issue might be on your OEM wiring but for the JL the... view full answer...
Go To Results